คุณวุฒิและสาขาวิชา
1994-1998 Bc.S. (Materials Technology) Faculty of Sciences, Department of Materials Technology, Ramkhamkaeng University, Bangkok, Thailand Project topic: Ceramics stain from lateritic clay.
2004-2006 M.Eng. (Materials Technology) School of Energy, Environment and Materials, Division of Materials Technology, King Mongkut’s University of Technology Thonburi, Thailand. Thesis topic: A study on Effect of Antioxidants on Properties of Ethylene Vinylacetate Copolymer Film.
2009-2015 Ph.D. (Materials Technology) School of Energy, Environment and Materials, Division of Materials Technology, King Mongkut’s University of Technology Thonburi, Thailand. Dissertation topic: A study on the Effects of Nano-additives on Processability and Mechanical Properties of Keratin Fibers Prepared by Electrospinning Process.
EMPLOYMENT AND PROFESSIONAL COLLABORATIONS
Present-2016 Lecturer in the Division of Aircraft maintenance Engineering Technology,
Department of Power Engineering Technology, College of Industrial Technology,
King’s Mongkut University of Technology North Bangkok, Thailand.
Subjects: Fuel and Lubricating system for Aircraft
Landing Gear
Introduction to Aircraft Maintenance
Human factor and Safety Management System
Engineering Materials for Aircraft
Metallic Materials for Aircraft
Non-Metallic and Composite Materials for Aircraft
Aircraft Composite Material Practice
Advanced Materials Technology for Vehicle
2012-2015 Part-time lecturer in School of Liberal Arts, King’s Mongkut University of
Technology Thonburi, Thailand.
Subjects: Learning and Problem-solving Skills,
Beauty of Life,
Leadership and Management.
2011-2012 Teacher assistance, Subject: Polymer testing (Hardness test, Impact test).
2003-2004 Researcher Assistant, Department of Science Service, Ministry of Science and
Technology.
1999-2003 Quality Assurance Manager, KIM PAI Lamitubes Co; Ltd.
ผลงานทางวิชาการ
KMUTT - NSTDA Project (Researcher assistance)- (2005-2006)
Development of Encapsulating for solar cell from Ethylene vinyl acetate (Researcher Assistant),.
KMUTT - PTT-Phenol Project (Researcher Assistance)- (2006-2007)
The Development of Plastic Food Containers from Polycarbonate
Phase 1.1 : A Study on BPA leaching and health risk assessment of the BPA (Literature Search)
Phase 1.2 : Database development and Patent Mapping’
KMUTT - B.International and Technology Co,Ltd. Project (Researcher) – (2007-2008)
Improvement of Toughness and Service Life of PVC Sheet for Use in Cattle Housing – Phase1
Improvement of Toughness and Service Life of PVC Sheet for Use in Cattle Housing – Phase2
KMUTT - PTT Project (Researcher) – (2008-2011)
Development of Biodegradable Packaging Film from Polylactide (PLA) – Phase1
Development of Biodegradable Packaging Film from Polylactide (PLA) - Phase2
Improvement of Heat distortion (HDT) properties of Bioplastic by added Natural fiber
KMUTNB (CIT) (Head Project) – (2016-2017)
Project: Training and Workshop on the Aircraft material Management and Technology transfer on aircraft composite material maintenance. (โครงการบรรยายเชิงปฏิบัติการ การจัดการความรู้ด้านวัสดุอากาศยานและถ่ายทอดเทคโนโลยีด้านการซ่อมบำรุงวัสดุคอมโพสิทอากาศยาน ประจำปีการศึกษา 2560)
KMUTNB (CIT) (Head Project) – (2018-2019)
Preparation and Characterizations of Electrospun base Keratin/PLA mixed with Clay and TiO2 composites fibers for filter application.
KMUTNB (CIT) (Head Project) – (2021-present)
Effect of morphology development on mechanical properties of self-sealing material of self-sealing fuel tank by adding nanocellulose.
KMUTNB (STRI) (Head Project) – (2021-present)
Viscosity improvement of recycled poly (ethylene terephthalate) from waste bottle by adding multi-functional reactive polymer and antioxidants for core material application
(ทุนอุดหนุนและส่งมอบผลการดำเนินงานภายใต้โปรแกรม 16 โครงการปฏิรูประบบ อววน. หัวข้อ การพัฒนาเทคโนโลยีสำหรับรถไฟฟ้าขนส่งผู้โดยสารอัตโนมัติแบบไร้คนขับ เรื่อง “การปรับปรุงค่าความหนืดของพอลิเอทิลีนเทเรฟทาเลตจากขยะขวด PET โดยการเติมสารมัลติฟังก์ชันนัลรีแอคทีฟพอลิเมอร์ เพื่อประยุกต์ใช้ในงานวัสดุแกน”)
Ceramics stain color, Polymer processing, Polymer composite, Polymer compounding, Polymer characterization, Biopolymers, Degradable polymer, Polymer degradation mechanism, Natural fibers, Electrospinning process for polymer nanofibers, Keratin extraction, Light weight materials, Materials for aircraft and new vehicles, Self-sealing materials from natural rubber, PET recycles, Melt viscosity improvement of rPET, rPET compound, rPET filament,
Isarankura Na Ayutthaya, S. and Wootthikanokkhan, J. (2008) , "Investigation of the Photodegradation Behaviors of an Ethylene/Vinyl Acetate Copolymer Solar Cell Encapsulant and Effects of Antioxidants on the Photostability of the Material". Journal of Applied Polymer Science, Vol. 107, No. 6, pp. 3853-3863.
J.Wootthikanokkhan, N. Wongta, N. Sombatsompop, A. Kositchaiyong, J. Wong-on, S. Isarankura na Ayutthaya, N. Kaabbuathong, (2011) “Effect of Blending Conditions on Mechanical, Thermal, and Rheological Properties of Plasticized Poly(lactic acid)/Maleated Thermoplastic Starch Blends”., Journal of Applied Polymer Science, Vol. 124 , pp. 1012-1019.
- Wootthikanokkhan, T. Cheachun, N. Sombatsompop, S. Thumsorn, N. Kaabbuathong, N. Wongta, J. Wong-On, S. Isarankura Na Ayutthaya, A. Kositchaiyong. (2012) " Crystallization and Thermomechanical Properties of PLA Composites: Effects of Additive Types and Heat Treatment ".Journal of Applied Polymer Science, Vol. 124, No. 2, pp 1012-1019.
Wootthikanokkhan, J., Kesemwananimit, P., Sombatsompop, N., Kositchaiyong, A., Wong-On, J., Isarankura na Ayutthaya, S., and Kaabbuathong, N., (2012) "Preparation of Modified Starch-grafted Poly(lactic acid) and a Study on Compatibilizing Efficacy of the Copolymers in Poly(lactic acid)/thermoplastic Starch Blends". Journal of Applied Polymer Science, Vol. 126, No. S1, pp. E389-E396.
Isarankura Na Ayutthaya S., Wootthikanokkhan J., Extraction of Keratin from Chicken Feather and Electrospinning of the Keratin/PLA Blends, 2013, The 4th International Conference on Multi-Functional Materials and Structures (MFMS 2013), 14-17 July 2013, Bangkok, Thailand.Advanced Materials Research Vol. 747 (2013) pp 711-714 (International conference proceeding)
Isarankura Na Ayutthaya, S., Tanpichai, S., Wootthikanokkhan, J., (2015) " Keratin Extracted from Chicken Feather Waste: Extraction, Preparation, and Structural Characterization of the Keratin and Keratin/Biopolymer Films and Electrospuns ". Journal of Polymers and the Environment, Vol. 23, pp. 506-516.
Isarankura Na Ayutthaya S.*, Tanpichai S., Wootthikanokkhan J., Preparation and structural characterization of electrospun fibers of chicken feather extracted keratin/poly(lactic acid)/clay, 2014, The 2014 IUPAC World Polymer Congress (MACRO 2014), Chiang Mai, Thailand, (Proceeding Macro2014, pp. 70-72).
Isarankura Na Ayutthaya, S., Tanpichai, S., Wootthikanokkhan, J., Sangkhun, W. (2016) " Effect of clay content on morphology and processability of electrospun keratin/poly(lactic acid) nanofiber". International Journal of Biological Macromolecules, Vol. 85, pp. 585-595.
Isarankura Na Ayutthaya S.*, Wootthikanokkhan J., Investigation of Morphology and Photocatalytic Activities of Electrospun Chicken Feather Keratin/PLA/TiO2/Clay Nanofibers, 2019, 2019 Research, Invention, and Innovation Congress (RI2C 2019), E3S Web of Conferences 141, 01003 (2020) (International conference proceeding : Best Paper Award)
Isarankura Na Ayutthaya S.*, Bunyarak M., Boondeacha N., Sangrawee N., Markmee N., Haaiant S., Viscosity improvement of recycled poly(ethylene terephthalate) from waste bottles by adding antioxidants and chain-extender, 2021, 2021 Research, Invention, and Innovation Congress (RI2C 2019), E3S Web of Conferences 302, 02019 (2021) (International conference proceeding)
ธนวิชญ์ ภาคอรรถ, มนัสวิน แก้วทิพย์, ยศวีร์ พูนจันทร์ และ สิริอร อิศรางกูร ณ อยุธยา*, ผลกระทบของการเติมสารเชื่อมโยงโมเลกุลและสารทำให้เกิดฟองที่มีต่อสมบัติของยางธรรมชาติ: สัณฐานวิทยา และสมบัติเชิงกลทั้งก่อนและหลังการบวมตัวในน้ำมันเชื้อเพลิง , 2564, วารสารเทคโนโลยีอุตสาหกรรม, เลขที่บทความ 5230 ปีที่ 17 ฉบับที่ 3 กันยายน - ธันวาคม 2564.
ญาณศรณ์ กนิษฐสังกาศ, เสฏฐวุฒิ ศรสุวรรณ์, เอกวัฒน์ ปานมี และ สิริอร อิศรางกูร ณ อยุธยา*, การพัฒนาสมบัติเชิงกลของชั้นวัสดุซ่อมแซมตัวเองของถังน้ำมันซ่อมแซมตัวเองได้โดยการเติมเส้นใยนาโนเซลลูโลส, 2564, วารสารเทคโนโลยีปทุมวัน, ปีที่ 11 ฉบับที่ 32 กันยายน-ธันวาคม 2564.